Monday, March 25, 2013

Toyota Tacoma Technical Service Bulletin Front Cowl Water Leak Repair Procedure

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg4n37OAESCAFFbmesMPV2m5ktGlvg4dKgRBC108WDFYSedLe04me9ObZSaUNziPgWhFvcSPSfkkKxrfqhitiNRtgJZ9JGLuX9ppOjmhhT0Fc4mj17vaUcEW6QsHh4YIYBM3q0_tEEksHKU/s400/Toyota-Tacoma_XRunner_2005_800x600_wallpaper_01.jpg

Short Description

Use the following field–fix procedure if water is present on the floor carpeting and it can be confirmed that the leak is from the front cowl seam.

Website: www.customtacos.com | Filesize: 55kb
No of Page(s): 4

Content
Toyota Glass Cleaner has been added to Required Tools & Materials. Steps 2 and step 3 have been updated in the confirmation procedures for the front cowl seam leak and the lower front cowl seam leak (step 2: Toyota Glass Cleaner added, step 3: air intake selector should be set to Fresh instead of Recirculate).

1. Remove wiper arms and plastic cowl cover. For further removal instructions, refer to the Technical Information System (TIS): 2005 model year Tacoma Repair Manual: Wiper & Washer: Windshield Wiper Motor Assy: Replacement.
2. Locate the left and right front cowl seam and wet area with Toyota Glass Cleaner. Refer to Figure 1 for the location of the left front cowl seam.


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.